Home/Products
  • SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.

    Specifications:

    Power Supply: AC100-240V 50/60Hz Output (max): 40W R module: 10W/LD Mitsubishi 638nm G module: 14W/LD Nichia 520nm B module: 16W/LD Nichia 450nm Scanning System:AT30H/840(±20°30K) Beam Size: 6×8mm Beam Divergence: <1.2mrad(full angle) Analogue modulation: 100k Analog/TTL IP level: IP65 Work Temp.: -20-40℃ Weight: 29kg Dimension: 495×471×226mm Dimension: EN60825-1:2014+A11:2021 System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
  • SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.

    Specifications:

    Power Supply: AC100-240V 50/60Hz Output (max): 60W R module: 15W/LD Mitsubishi 638nm G module: 20W/LD Nichia 520nm B module: 25W/LD Nichia 450nm Scanning System: AT30H/1040 (20°25K) Beam Size: 7×12mm Beam Divergence: <1.5mrad(full angle) Analogue modulation: 100K,Analog/TTL IP level: IP65 Work Temp.: -20-40℃ Weight: 50kg Dimension: 630×495×253mm System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound Compliant with: EN60825-1:2014+A11:2021 Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
  • SONICBOOM ReCO2 is real CO2 JET simulator evolved from our SONICBOOM platform but with an additional high-speed turbofan, which makes it same blast speed as CO2 JET and even more powerful output upto 15m. With the 5L built-in tank, it can generate accumulatively 10min smoke columns, equals to 10 large size CO2 gas bottles. Just similar as our SONICBOOM JET, it also integrated with 30pcs of 9W LED, makes the smoke columns more colorful and impressive.

    Specifications:

    Dimension: 432x325x365mm Weight: 30kg Voltage and Fuse: AC220-240V, 50/60Hz, 15A/250V; AC100-120V, 50/60Hz, 18A/250V Work Power: 3000W/1800W (220V version); 2400W/1800W (110V version) Max Output Height: 15m LED power: 9W*30PCS Max Continuous Output Duration: 8s Smoke Output: 120000cuft/min Tank Capacity: 5L built-in tank Fluid Consumption Rate: 500ml/min DMX Channels: 1/11 channel switchable Fuels: FX-S, FX-M
  • SPARKULAR® BLASTER is a brand new handheld SPARKULAR machine. We break through the traditional SPARKULAR design and creatively adopt a brand new structural concept makes SPARKULAR BLASTER a fantastic handhold spark effects device for DJs, singers etc. applications on stage.

    Specifications:

    Dimension: 585 x 270 x 95mm Net weight: 3.8kg Voltage: AC100-240V, 50/60Hz Work Power: 180W Housing Material: Reinforced nylon Charging Time: Appr.40min Standby Time: 90min Firing Direction: Waving between 60° to 0° Hopper Capacity: 200g HC8200 Consumption Rate: 17g/min Consumable: HC8200 MEDIUM Effect Output: 2-4m adjustable (MEDIUM), 3-5m adjustable (LARGE)
  • SPARKULAR® Cyclone II is an upgrade based on SPARKULAR® Cylone. Thanks to the new design and technologies we introduced, it is with 35% smaller on the footprint, and 40% lighter on weight (only 16kg) comparing with the first generation. Besides, the noisy is also greatly decreased.

    Specifications:

    Dimension: 348×316×290mm Weight: 16kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work Power: 1500W Hopper Capacity: 450g HC8200 consumption: 65g/min Fountain Height: 5-10m adjustable Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT Control: DMX DMX channels: 2
  • SPARKULAR® II is a brand new upgrade based on patented SPARKULAR® platform combined with valuable feedbacks from our customers, latest technologies and our years of experiences,. Comparing with the SPARKULAR®, SPARKULAR® II with effect up to 6m, much lower noisy, more powerful feeding structure and real time motor status monitoring ensure less stuck and safer firing. 3.2” LCD color screen, touch keypad, flat structure design etc modern features makes it more user friendly when operating the system. It is an ideal choice for circumstance where low noisy output and higher spark effects are preferred. 

    Specifications:

    MODEL: BT11/BT12 DIMENSION: 286×280×258mm WEIGHT: 9kg VOLTAGE: 220V(BT11)/110V(BT12), 50/60Hz WORK POWER: 500W EFFECT HEIGHT: HC8200 LARGE: 3-6m/MEDIUM: 2-4.5m/SMALL: 1.5-3m HOPPER CAPACITY: Appr. 300g CONTROL: DMX, Wireless INTERFACE: Neutrik®powerCON TRUE1 IN/OUT 3 and 5 pin DMX IN/OUT DMX channels:2 CASING MATERIAL: Anti-flaming ABS + PC, Aluminum
     
  • SPARKULAR® JET II is a brand new upgrade based on our first generation of SPARKULAR® JET combined with valuable feedbacks from our customers, latest technologies and our years of experiences. It is with much shorter firing delay and allows triple continuous shots with almost no turn around time. Besides, it update to our latest interface design with ARM indicator light; same as first generation, SPARKULAR® JET II also equipped with built-in automatic air compressor, no external pressure tank needed. Except 3 and 5-pin DMX control it also can be triggered by 9-60V pyro signal.

    Specifications:

    Dimension: 348×348×290mm Weight: 25kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work Power: 800W Hopper Capacity: 450g*2 HC8200 consumption rate: 20-25g/shot Fountain Height: HC8200 LARGE: 9-10m; HC8200 MEDIUM: 6-8m Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT Control: DMX, 9-60V pyro signal DMX channels: 2
  • SPARKULAR® MOBILE is a battery powered truly wireless SPARKULAR developed by SHOWVEN. It is super compact and light weighted, only 6kg with built-in battery. Benefit from our intelligent battery management system and higher efficiency energy conversion, SPARKULAR MOBILE with extra long standby time, >3h when heating on and >144 when heating off. With our latest heating technology the new SPARKULAR MOBILE requires much lower (30% lower) temperature, thus ensure much safer for indoor use. It is an ideal choice for small gatherings, ceremonies or even stadium applications when power supply is complicated.

    Specifications:

    Dimension: 168 x 180 x 257mm Net weight: 6kg Voltage: AC100-240V, 50/60Hz Housing Material: FR-ABS + Aluminium Motor Status Monitoring: Yes Heating up time: Appr. 2min Charging time: Max. 5h Charging power: 100W Standby time: Standby with heating ON > 3h; Standby with heating OFF > 144h Hopper Capacity: 100g Interface: 3-pin XLR, POWER IN/OUT,DC 5V Control: DMX; 2.4GHz and 433MHz wireless remote Effect Height: HC8200 LARGE: 3-4m; HC8200 MEDIUM: 2-3m
  • SPARKULAR® WAVER is 180 degree waving spark effect originally developed by SHOWVEN. It can firing in any single direction between -90 to 90 degree or in waving sequences etc. With 72 preset firing sequences and various editable sparks effect brings infinite creativity to your stage.

    Specifications:

    Dimension: 300 x 290 x 273mm Net weight: 15.5kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work power: 500W Effect height: 2.5-4.5m adjustable Hopper capacity: Appr. 400g Housing Material: 304 stainless steel Motor Status Monitoring: Yes Color Screen: Yes, 3.2” Firing Direction: Waving between -90° to 90°  Fixed firing angle between -90° to 90° Effect Angle Adjustable: Yes, -90° to 90° Preset Firing Sequences: Yes, 72 preset firing sequences Interface: 3-pin and 5-pin XLR Control: DMX, 6 channels  
  • SPARKULAR® waverFALL is 180°waving spark fall effect originally developed by SHOWVEN. It can firing in any single direction between -90° to 90° or in waving sequences. With 72 preset firing sequences and various editable sparks effect brings infinite creativity to your stage. It can also combined with SPARKULAR WAVER to generate a spark effect in any direction of 360 degrees.

    Specifications:

    Dimension: 300 x 305 x 285mm Net weight: 17kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work Power: 500W Housing Material: 304 stainless steel Motor Status Monitoring: Yes Color Screen: Yes, 3.2” Firing Direction: Waving between -90° to 90°;Fixed firing angle between -90° to 90° Effect Angle Adjustable: YES, -90° to 90° Preset Firing Sequences: YES, 72 preset firing sequences Hopper Capacity: 400g HC8200 Consumption Rate: 25g/min Interface: 3-pin and 5-pin XLR Control: DMX, 6 channels Effect Height: LARGE: 3-4m; LARGE I: 4-5m; LARGE II: 5-7m
  • SPARKULAR® WHEEL is another brand new sparks effects originally introduced by SHOWVEN. The output nozzles can rotate 360 degrees and can also firing in any fixed direction. It can simulate the molten iron flower effect, if combined several units together it can also generate fireworks wheel effects. It can be used on both big stages and small wedding gatherings.

    Specifications:

    Dimension: 310×307×285mm Weight: 16kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work Power: 500W Hopper Capacity: 550g HC8200 consumption: 50g/min Fountain Height: Appr. 4m upward, 6-7m downward, 5-6m sparks diameter when rotating Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT Control: DMX DMX channels: 6
  • SPARKULAR® WP is a newly designed SPARKULAR for outdoor or high moisture environment applications, it is with 1200g extra large hopper and up to 6m adjustable fuller sparks effects. With the new concept design it is much easier for maintenance.

    Specifications:

    Dimension: 317x287x295mm Weight: 14kg Voltage: AC 200-240V/AC 100-120V,50/60Hz Power: 700W Hopper capacity:1200g HC8200 consumption: 25g/min Fountain Height: MEDIUM: 4-4.5m, LARGE/LARGE I(5.5-6m) Control:DMX Interface: NEUTRIK POWERCON TRUE1 IN/OUT; IP65 rated 3-pin and 5-pin XLR IN/OUT DMX channels:2

toto slot


rtp live


toto slot


toto macau


slot thailand


slot toto


slot qris


slot maxwin


slot qris


slot garansi kekkalahan


slot mahjong


spaceman slot


slot min depo 5k


slot gacor


5 lions megaways 2


gacor4d


slot gacor hoki


toto slot


slot gacor


sbobet88


toto slot


slot thailand


situs toto


slot gacor 4d


slot thailand


situs toto


situs slot


situs toto


scatter hitam


situs toto


toto macau


toto macau


situs slot gacor


slot gacor 4d


slot thailand


slot thailand


toto slot


bandar toto slot


toto slot


slot gacor maxwin


slot gacor


slot online


situs toto slot


slot 4d


slot dana


slot gacor


slot 4d


slot qris


pay4d slot


slot gacor


gacor4d


heylink slot gacor


pola slot gacor


mega sicbo


depo 20 bonus 20


akun pro thailand


pola gacor


totoagung


totoagung


totoagung


totoagung


totoagung


slot qris


scatter hitam


slot gacor maxwin

cantiktoto

slot gacor 4d

slotgacor4d totoagung totoagung amintoto restoslot4d restoslot4d restoslot4d restoslot4d restoslot4d restoslot4d restoslot4d restoslot4d restoslot4d slotgacor4d totoagung slot qris gacor4d link maxwin qdal88
slotgacor4d totoagung slot gacor 4d slot gacor 4d toto slot slot gacor 4d link totoagung gacor4d gacor4d qdal88 gacor4d totoagung slot slotgacor4d totoagung login
slotgacor4d toto slot gacor4d