Dimension：76.5×82.5×230mm (clamps included) Weight：1 kg Input：110-120V / 220-240V,50/60Hz Work power：30W Load Capacity：20kg Control：Direct on-off voltage control
Dimension：435×380×405 mm Weight：40 kg Housing material：304 stainless steel Input：AC100-240V, 50/60Hz Work power：400W Flame height：3-10m(no wind) Usage in Rain: Yes Ignition: Triple, high voltage electron ignition Control: DMX, 9-60V pyro signal Quick Couplers: ISO7241B G1/4 male Work pressure range: 8-12Bar Firing Angle: 5 Installation Direction: Any direction Fuel: ISOPAR L Pressure Gauge: Yes, mechanical
CO2 JET is a compact CO2 effect machine blows clouds of CO2 up to 8m. It is with multi angles adjustable and unlimited installations even upside down. Built in DMX and direct on-off control makes it versatile for different application situations.
Dimension: 285 x 192 x 192 mm
Weight: 5kg
Input: AC110V / AC220V
Work Power: 24W
Max Output Height: 10m
Control: DMX, Direct on-off voltage control
DMX Channels: 1 channel
Quick Coupler: DNP G3/8” quick coupler
Pressure: 60bar / 870.22Psi
PyroSlave X4 is a fireworks igniter specially designed for stage special effects professionals to wireless control of Flamer, confetti shooter etc via Pyro signal. To adapt to extreme outdoor applications, PyroSlave X4 equipped with robust aluminum housing, touch keys, and metal connection terminals. PyroSlave X4 with 433M and 868M dual-band antennas communicate simultaneously, preventing signal interference on a single frequency band. Compared with wireless DMX, PyroSlave X4 wireless signals have perfect anti-interference performance in large-scale events.
Dimension: 150 x 165 x 85 mm
Net Weight: 1.3 kg
Output: 4
Trigger Indicate: LCD display and record
Address: 256 (00 to FF)
Control: Dual-band wireless
Wireless Range: 600m
Firing Voltage: 24V
Firing Current: 5A
Firing Duration: 500ms
Resistance Test: Yes
Battery: 2 * 18650 cell (4.2V, 2500mAh), battery not included
Operation Time: 60h, sleep mode 2 weeks
Charging Port: Type C
Charging Time: Appr. 6h
Waterproof Level: IP65
Minimum Firing Interval: 10ms
Dimension: 295 x 205 x 91 mm
Net Weight: 1.7 kg
Output: 16
Trigger Indicate: RED means firing, GREEN means connected
Address: 256
Control: Dual-band wireless, 2-wire PBUS (communication + charging)
Wireless Range: 600m
Wired Range: 2000m
Firing Voltage: 12V
Firing Current: 5A
Firing Duration: 500ms
Resistance Test: Yes
Battery: 4 * 18650 cell (4.2V, 2500mAh), battery not included
Operation Time: 60h, sleep mode 2 weeks; Wired mode: non-stop
Charging Control: Max. 25 units PyroSlave per PyroAdaptor
Wired Communication: Max. 64 units PyroSlave per PyroAdaptor
Charging Time: Appr. 6h
Minimum Firing Interval: 10ms
Dimension: 117 x 65 x 28mm
Net Weight: 0.15kg
Battery: 3pcs 23A 12V battery
Work Power: 0.2W
Work Temp.: -20℃-50℃
Simulated Remote Control Type: YK02 and PROGO
PyroMote is a handheld intelligent system dedicated to controlling PyroSlave for fireworks displays. It uses a touch screen to complete the setting operation and a physical keyboard to realize the ignition operation. It can not only realize manual firing with buttons, but also running auto ignition files. Besides, it supports TLC time code function. It is a handy and powerful tool for small to medium-sized fireworks displays.
Dimension: 218 x 107 x 40mm
Net Weight: 0.5kg
Input: 5V 2A
Work Power: 10W
Casing material: Aluminium
Battery Powered: 2pcs 18650 battery
Charging Time: 3h
Standby Time: 6h
Wireless Function: Dual band wireless PYRO
Interface: USB, 3.5mm Audio Output, LTC IN, DMX OUT
Work Temp.: -20℃-50℃
SHOWVEN series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Power Supply: AC100-240V 50/60Hz
Output: 60W
R module: Mistsubushi 635nm
G module: Nichia 525nm
B module: Osram 455nm
Scanning System: ±20°, 30K
Beam Size: 8×9mm
Beam Divergence: <1.5mrad
Analogue modulation: 100K,Analog/TTL
IP level: IP65
Cooling System: Enhanced TEC
Work Temp.: -20-40℃
Weight: 30kg
Dimension: 460×318×214mm
System Control: Ethernet, DMX, ILDA, Auto, SD card, Sound,FB4(optional)
Compliant with: CE
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
SHOWVEN series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Power Supply: AC100-240V 50/60Hz
Output (max): 40W
R module: Mitsubishi 638nm
G module: Nichia 525nm
B module: Nichia 455nm
Scanning System: ±20°, 30K
Beam Size: 6×8mm
Beam Divergence: <1.2mrad
Analogue modulation: 100k Analog/TTL
IP level: IP65
Cooling System: Enhanced TEC
Work Temp.: -20-45℃
Weight: 23kg
Dimension: 412×272×240mm
Dimension: CE, FDA
System Control: Ethernet, DMX, ILDA, Auto, SD card, Sound,FB4(optional)
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
SHOWVEN series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Power Supply: AC100-240V 50/60Hz
Output (max): 30W
R module: Mitsubishi 638nm
G module: Nichia 525nm
B module: Nichia 455nm
Scanning System: ±30°, 35K
Beam Size: 6×7mm
Beam Divergence: <1.2mrad
Analogue modulation: 100K Analog/TTL
IP level: IP65
Cooling System: Enhanced TEC
Work Temp.: -20-45℃
Weight: 22kg
Dimension: 412×272×240mm
System Control: Ethernet, DMX, ILDA, Auto, SD card, Sound,FB4(optional)
Compliant with: CE, FDA
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
uFetti Shooter is a type of new confetti/streamer shooter working with compressed air, equipped with built-in air compressor and battery (CA12) makes it super easier for stadium applications, together with SHOWVEN PyroSlave series firing system to achieve non interference wireless control, no DMX or power cable are needed. For faster pressurize of the tank, we reserve the external air coupling connector so that operator can use their own air compressor to fill the tank. To meet different output volume request, we developed two models uFetti Shooter CA12 and CA36 with different output capacity.
Dimension: 600 x 560 x 880mm (CA12 with casters);730 x 645 x 880mm (CA36 with casters)
Net Weight: 75kg (CA12) / 90kg (CA36)
Voltage: AC100-240V, 50/60Hz
Work Power: 180W (CA12) / 220W (CA36)
Confetti Pipe Capacity: 5L (CA12) / 10L (CA36)
Interface: 3-pin and 5-pin XLR, PowerCON TRUE 1
E-stop Connector: YES, can be connected in series
Output : CA12: Up to 43m (20m*5cm streamer), up to 22m (confetti);CA36: Up to 45m (20m*5cm streamer), up to 22m (metallic confetti)
Output Angels: -27°-41° (12 adjustable angles)
18650 Battery Powered Design: Yes (CA12), NO (CA36)
Pressure Tank Volume: 12L (CA12) / 36L (CA36)
External Air Compressor Connetor: Yes
Caster: 4 casters with brake
Valve Size: 2.5 inch (CA12), 3 inch (CA36)
uFetti Blower CB16 is DMX controllable acompact confetti launcher, equipped with high speed blower and a 9L automatic confetti dosing hopper. Operator can adjust the confetti output density by DMX even under running status. It can be widely used in indoor, outdoor and various special applications.
Dimension: 573x324x384mm
Net weight: 19kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 1600W
Hopper Capacity: 9L (tissue paper 2kg, metallic 3kg)
Continuous Output Durations with Full Load: 2-15min
Interface: 3-pin and 5-pin XLR
Control: DMX, Wireless DMX (via 5-PIN DMX IN)
Output: Up to 10m
Blower Speed Adjustable: Yes
Output Density Adjustable: Yes
LED Warning Light: Yes
Select your country