Products Archive - Page 4 of 9

DMX Relay R12

The DMX Relay R12 allows sfx technicians to add DMX control to any switchable device which not include onboard DMX such as CO2 jet, confetti blasters etc. It can convert the DMX signal from the master console into a voltage signal for output. DMX Relay R12 maximum support 12units of switchable devices.

Specifications:

Dimension: 485 x 180 x 120 mm Weight: 5kg Input: 200-240V/100-120V, 50/60Hz Control Voltage Output: 110V / 220V Voltage Output Interface: 12 Maximum Output Current: 10A Power Input Connector: Neutrik NAC3PX-TOP Voltage Output Connector: Neutrik NAC3FPX-TOP

Details
CREEPER AQ mini Low Fog Generator

CREEPER AQ mini is the most compact water based low fog generator, it is based on ultrasonic technology, the main consumable is purified water, no need dry ice, ensure it not only environmental friendly, but also more cost effective. It is an ideal choice for small scale events such as night club, wedding, small playhouse etc.

Specifications:

Dimension: 460x300x324mm Weight: 15kg Voltage: 200-240V/100-120V, 50/60Hz Fog Output: 10,000cuft/min Work power: 2000W Heating Up Time: Appr. 1-2min Consumable: FX-M Fog Fluid, Water Fog fluid tank capacity: 2L Water tank capacity: 6.5L Max. Fluid Consumption: Appr.32ml/min Max. Water Consumption: Appr.250ml/min Interface: 3-pin XLR Control: DMX, 2 channels; Remote control

Category: LOW FOG MACHINE

Details
uFetti Blower

uFetti Blower is a powerful confetti launcher with output up to 18m, equipped with dual fully automatic confetti dosing hopper and can be controlled both manually or automatically by DMX. Take advantage of the customized high-power blower and optimized Venturi tube design, the confetti can be spread farther and wider.

Specifications:

Dimension: 880 x 660 x 1295mm Weight: 112kg Input and power: AC200-240V / AC100-120V, 50/60H; 2200W Confetti Hopper: 2, separate control of each hopper Hopper Capacity: 2kg paper confetti / hopper *2; 4kg metallic confetti / hopper *2 Consumption Rate: Paper confetti: 0.9kg/min; Metallic confetti: 1.8kg/min Interface: 3-pin and 5-pin XLR Control: Manual, DMX, Wireless DMX (via 5-PIN DMX IN） Output: Up to 18m Output Angels: 40°-90° (6 adjustable angles) Blower Speed Adjustable: Yes (High/Low) Output Density Adjustable: Yes LED Warning Light: Yes Caster: 4 casters with brake

Details
Flame Head – uFlamer® x20

SHOWVEN 18m FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head X20, pump station P20H, accumulator model and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed.

Specifications:

Dimension：330 x 330 x 320 mm Weight：18 kg Housing material：304 stainless steel Input：AC100-240V, 50/60Hz Work power：100W Flame height：16-18m(no wind) Usage in Rain: Yes Fuel consumption:1000ml/s Ignition: Triple, high voltage electron ignition Control: DMX, 9-60V pyro signal Quick Couplers: ISO7241B G1/4 male Work pressure range: 40-60Bar

Firing Angle: Vertical Up Installation Direction: Vertical Up

Fuel: ISOPAR L (if use with uPumper P20H)

Pressure Gauge: Yes, mechanical

Min.Firing Duration: 0.2s

Max.Firing Duration: 1s

Category: FLAMER

Details
Flame Head – uFlamer® X1800

SHOWVEN® FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head, pump station, control box and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed. Any installation direction of flame heads brings endless design inspiration to event planners.

Specifications:

Dimension：370 x 380 x 380 mm Net Weight：19 kg Housing material：304 Stainless steel Input：220V, 110V Work power：260W Flame height：Up to 10m USAGE IN RAIN: yes Quick Couplers: ISO7241B G1/4 male Min. firing duration: 0.1s Firing Angle: 210° (±105°) Fuel: ISOPAR Fuel consumption: 60ml/s (Nozzle M), 30ml/s (Nozzle L) Ignition: Dual, high voltage electron ignition Control: DMX, 9-60V Pyro signal USAGE IN RAIN: yes WORK PRESSURE RANGE: 8-12bar INSTALLATION ANGLES: Any direction, bottom plate need protective cover (optional) to achieve waterproof function

Category: FLAMER

Details
uFlamer®

uFlamer® is a global pioneer of vertical fluid driven flamer, with flame height up to 8-10m. Equipped with built-in fuel tank and pumping system makes it super easy to setup and operate. The fuel for uFlamer is ISOPAR, which is much safer as well as less restrictions comparing with existing gas flamers on the market.IPX3 rated design and indoor nozzle optional ensure flexible usage of uFlamer®.

Specifications:

Model: uFlamer

Dimension: 330 x 260 x 320 mm Weight: 14kg VOLTAGE: 100-240V, 50/60Hz POWER: 300W CONTROL: DMX INTERFACE: 3-pin&5-pin DMX IN/OUT FLAME HEIGHT: 8-10m (no wind) FUEL: ISOPROPANOL, ISOPAR-G,H,L,M FUEL TANK CAPACITY: 5L FUEL CONSUMPTION RATE: 60ml/s FUEL LEVEL SENSOR: YES EFFECT DIRECTION: Vertical LGNITION: High voltage electron ignition IGNITOR: Dual BUILT-IN BATTERY: OPTIONAL USAGE IN RAIN: YES

Category: CIRCLE FLAMER

Details
PyroSlave

PyroSlave is a serial fireworks igniter specially designed for pyro technicians and stage special effects professionals. To adapt to extreme outdoor applications, PyroSlave is equipped with robust aluminum housing, touch keys, and metal connection terminals. PyroSlave can be operated both wired and wireless. Wireless mode with dual-band antennas communicate simultaneously, preventing signal interference on a single frequency band. The 2-wire PBUS technology used in wired communication can realize power supply while communicating. There are two models of PyroSlave available X16 and X32.

Specifications:
Dimension: X16: 335 x 165 x 85 mm;X32: 425 x 165 x 85 mm X16: 3 kg;X32: 4.1kg X16: 16;X32: 32 Trigger Indicate: LCD display and record Address: 256 (00 to FF) Control: Dual-band wireless, 2-wire PBUS (communication + charging) Wireless Range: 600m Wired Range: 2000m Firing Voltage: 24V Firing Current: 5A Firing Duration: 500ms Resistance Test: Yes Battary: Support 4 * 18650 cell, 4.2V, 2500mAh per piece (battery not included) Operation Time: 60h, sleep mode 2 weeks; Wired mode: non-stop Charging Control: Max. 25 units PyroSlave per PyroAdaptor Wired Communication: Max. 64 units PyroSlave per PyroAdaptor Charging Time: Appr. 6h Waterproof Level: IP65 Minimum Firing Interval: 10ms

Category: CONSOLE&PYRO

Details
DMX SPLITTER 8

DMX SPLITTER 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals into 8 separate outputs. When it use together with SHOWVEN devices (FXcommander and SHOWVEN special effects device) it with bi-directional data transfer function. Each input and output interface adopts electrical isolation technology. DMX SPLITTER 8 can effectively buffer, amplify and split standard DMX signal received, input to output, output to output electrical isolation withstand voltage greater than 1000V.

Specifications:
Dimension: 530×153×49mm Weight: 2.8kg Input: AC 220V/110V, 50/60 Hz Work power: 5W Housing material: 304 Stainless steel Interface: Neutrik PowerCON TRUE1; Neutrik DMX IN×1; Neutrik DMX THRU×1; Neutrik DMX OUT×8

Category: CONSOLE&PYRO

Details
uFlamer Gasboom

uFlamer Gasboom is the safest gas flamer ever on the market, with a series of safety features including 0.1s super sensitive flame monitoring, cascadable power cut-off E-stop connector, dual high voltage electron igniter, patented “SFT” technology, safety lock, dual magnetic valves, shut-off valve, ARM warning light etc. With 5 types of nozzles optional, 2/4 built-in gas cartridges positions, flame effect height from 2 to 8m ensure versatile applications for both indoor and outdoor events.

Specifications:

Dimension: 320 x 310 x 325 mm Weight: 13kg Input and power: 100-240VAC, 50/60 Hz; 200W Housing Material: 304 stainless steel Effect Direction: Vertical Flame Height: 2-8m (nozzle size, firing time etc.) E-Stop Interface: Yes, can be connected in series Dual Magnetic Valves: Yes, connect in series High Sensitive Flame Monitoring: Yes, sensitivity up to 0.1s Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT Control: DMX 512, 9-60V voltage input; Wireless, with Wirelss DMX Receiver (5-PIN DMX IN with DC5V power supply) Ignition: High Voltage Electron Ignition×2 Built-in Battery Design: Yes, 4×18650 Lithium cells Waterproof Level: Can be used in heavy rain

Firing Duration: 0.1-10s

Fuel: LPG propane or butane gas, gas cartridges bottle, aerosol cartridges Cartridge Holder: Twin cartridge holder with 2 shut-off valves and 2 non-return valves; Quadruple cartridge holder with 4 shut-off valves and 4 non-return valves (optional) Micro Filter: Yes, installed between shut-off and non-return valves

Category: FLAMER

Details
SONICBOOM® JET

SONICBOOM JET is a revolution CO₂ jet simulator with stronger burst and massive instant fog output up to 15m. SONICBOOM JET simulate traditional CO₂ jet to the greatest extent through our patented supercharging technology, which ensure much faster burst and higher effect than existing smoke jet product on market.

Specifications:
Dimension: 546 x 331 x 372 mm Weight: 37kg Voltage and Fuse: AC220-240V, 50/60Hz, 15A/250V; AC100-120V, 50/60Hz, 18A/250V Work Power: 3000W/1800W (220V version); 2400W/1800W (110V version) Max Output Height: 15m LED Power: 9W*30PCS Max Continuous Output Duration: 6s Smoke Output: 150000cuft/min Tank Capacity: 6L, stainless steel built-in tank Fluid Consumption Rate: 1.1min/L DMX Channels: 1/11/14 channel switchable Fuels: FX-S, FX-M

Category: SMOKE

Details
SPARKULAR® WAVER

SPARKULAR® WAVER is 180 degree waving spark effect originally developed by SHOWVEN. It can firing in any single direction between -90 to 90 degree or in waving sequences etc. With 72 preset firing sequences and various editable sparks effect brings infinite creativity to your stage.

Specifications:
Dimension: 300 x 290 x 273mm Net weight: 15.5kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work power: 500W Effect height: 2.5-4.5m adjustable Hopper capacity: Appr. 400g Housing Material: 304 stainless steel Motor Status Monitoring: Yes Color Screen: Yes, 3.2” Firing Direction: Waving between -90° to 90° Fixed firing angle between -90° to 90° Effect Angle Adjustable: Yes, -90° to 90° Preset Firing Sequences: Yes, 72 preset firing sequences Interface: 3-pin and 5-pin XLR Control: DMX, 6 channels

Details
uFlamer® Volcano

uFlamer® Volcano is high end liquid flamer system with five nozzles, each nozzle can firing individually or simultaneously. Volcano with 90 preset firing sequences, 25L built-in fuel tank and pumping system, multi safety design and reliable valve component allowing operators to create spectacular firing effects much easier. It is an ideal choice for fireworks displays, outdoor concert, opening ceremony, sports, scenic area etc.

Specifications:

DIMENSION: 630×450×400mm WEIGHT: 48kg HOUSING MATERIAL: 304 stainless steel VOLTAGE: 220v/110V, 50/60Hz WORK POWER: 2000W FLAMER HEIGHT: 8-10m FLAME ANGLES: 5 directions FUEL: ISOPAR, ISOPROPANOL FUEL TANK CAPACITY: 25L FUEL CONSUMPTION: 60mL/s per nozzle WORK TEMP.: -20℃ to 50℃ INTERFACE: SEETRONIC 3-PIN & 5-PIN XLR, Neutrik® PowerCON TRUE1 IGNITION: High voltage electron ignition CONTROL: DMX, 9-60V Pyro USAGE IN RAIN: YES

Category: FLAMER

Details