-
-
cFlamer is a color flamer with a single vertical output nozzle. It integrated with a water and corrosion-resistant pump and pipe systems inside machine, along with SHOWVEN original color additives, it can generate 5 different color flames red, green, blue, yellow and purple. Besides, it is also compatible with regular flame fluid such as ISOPAR, ISOPROPANOL. The maximum flame height is about 10m.Specifications:
Dimension: 370x330x305mm
Weight: 20kg
Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 400W
Housing Material: Aluminum + 304 stainless steel
Effect Direction: Vertical
Max. Flame Height (No Wind): 10m
Fuels: Color fluid, ISOPAR L, ISOPROPANOL
Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE
Fuel Tank Capacity: 5.3L
Nozzle Type: Nozzle cH
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Fuel Filtration: Yes
Ignition: High Voltage Electron Ignition*2
Valve: Dual
Use in Rain:Yes
-
cFlamer Boom is a never-seen special effect system with triple amazing effects including flame ball, sparks, and boom sound. It can use the regular fuel such as ISOPAR, ISOPROPANOL. In the meantime it can also use the color fluid to generate color flame balls.
Specifications:
Dimension: 580x400x428mm
Weight: 54kg
Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 600W
Housing Material: Aluminum + 304 stainless steel
Effect Direction: Vertical
Max. Flame Height (No Wind): 8-10m
Fuels: Color fluid, ISOPAR L, ISOPROPANOL
Sparks Effect Consumable: HC8200 LARGE
Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE
Fuel Tank Capacity: 5.3L
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Fuel Filtration: Yes
Ignition: High Voltage Electron Ignition*2
Valve: Dual
Use in Rain:Yes
-
cFlamer mVolcano is a highly compact mini 5 heads color flamer, it can fire in five different directions while it can only fire in one direction each time. Same as cFlamer it integrated with a water and corrosion-resistant pump and pipe systems inside machine, along with SHOWVEN original color additives, it can generate 5 different color flames red, green, blue, yellow and purple.
Specifications:
Dimension: 460x330x305mm
Weight: 26kg
Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 400W
Housing Material: Aluminum + 304 stainless steel
Effect Direction: 5 angles
Max. Flame Height (No Wind): 10m
Fuels: Color fluid, ISOPAR L, ISOPROPANOL
Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE
Fuel Tank Capacity: 7.5L
Nozzle Type: Nozzle cH
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Fuel Filtration: Yes
Ignition: High Voltage Electron Ignition*2
Valve: Dual
Use in Rain:Yes
-
cFlamer Quad is a vertical color flamer but integrated with 4 systems inside so that it can generate 4 different color flames from the integrated nozzle. With the preset sequences, it can generate color-changing flames makes it a unique flame effect on market.
Specifications:
Dimension: 585x419x330 mm
Weight: 51kg
Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 1500W
Housing Material: Aluminum + 304 stainless steel
Effect Direction: Vertical
Max. Flame Height (No Wind): 10m
Fuels: Color fluid, ISOPAR L, ISOPROPANOL
Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE
Fuel Tank Capacity: 2.5L*4
Nozzle Type: Nozzle cH Combo
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Fuel Filtration: Yes
Ignition: High Voltage Electron Ignition*2
Valve: Dual
Use in Rain:Yes
-
cFlamer Volcano is a 5 heads flamer integrated with 5 systems inside the machine, it can generate 5 different colors at different firing angles at the same time. Each of the output nozzle can be controlled separately, that means you can firing any nozzle individually or all 5 nozzles all together at the same time.
Specifications:
Dimension: 690x525x375mm
Weight: 76kg
Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 2000W
Housing Material: Aluminum + 304 stainless steel
Effect Direction: 5 angles
Max. Flame Height (No Wind): 10m
Fuels: Color fluid, ISOPAR L, ISOPROPANOL
Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE
Fuel Tank Capacity: 5L*5
Nozzle Type: Nozzle cH
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Fuel Filtration: Yes
Ignition: High Voltage Electron Ignition*2
Valve: Dual
Use in Rain:Yes
-
CIRCLE FLAMER II is developed with the integration of our second generation liquid flamer plateform and CIRCLE FLAMER platform, to generate bigger and higher flame throw upto 12m with 210° waving angles, With dual built-in high pressure pump, it ensures better combustion rate than existing liquid flamers on market. The waving motor of CIRCLE FLAMER II with angle block detection and memory function thus it is more easier for operator to set angle limit. It can also be powered with 18650 batteries.
Specifications:
Dimension: 610 x 330 x 330 mm
Weight: 32kg
Input and Power: 100-240VAC, 50/60 Hz, 550W
Housing Material: Aluminum
Effect Direction: 210° (±105°)
Max. Flame Height (No Wind): Nozzle H: 10-12m
Fuels: ISOPAR G, H, L, M; ISOPROPANOL
Fuel Tank Capacity: 9L
Fuel Consumption Rate:Nozzle M: 60ml/s
Interface: NEUTRIK POWERCON TRUE1 IN/OUT;Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX, 9-60V Pyro Signal
E-stop: Yes
ARM Indicator Light: Yes
Liquid Level Sensor: Yes
Ignition: High Voltage Electron Ignition * 2
Valve: Dual
Pump: Dual
Built-in Battery Design: Yes, 18650 battery
Use in Rain: Yes
-
CO2 JET is a compact CO2 effect machine blows clouds of CO2 up to 8m. It is with multi angles adjustable and unlimited installations even upside down. Built in DMX and direct on-off control makes it versatile for different application situations.
Specifications:
Dimension: 285 x 192 x 192 mm
Weight: 5kg
Input: AC110V / AC220V
Work Power: 24W
Max Output Height: 10m
Control: DMX, Direct on-off voltage control
DMX Channels: 1 channel
Quick Coupler: DNP G3/8” quick coupler
Pressure: 60bar / 870.22Psi
-
SHOWVEN® Fake Flame simulate the gas flames, but uses no flammable materials. It create a very realistic artificial flame by projecting colored light to water mist. It is designed for theme park, theater etc occasions where a flame effect is desired while real flame is not allowed.
Specifications:
Dimension: 760 x 460 x 660mm
Weight: 35kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 800W
LED: 3W, 68pcs
Tank Capacity: 12L
Consumable: Water (purified water is preferred)
Interface: 3-pin and 5-pin XLR
Control: DMX, 4 Channels
Fake Flame Height: 1-2m
Fake Flame Height Adjustable: Yes
Fake Flame Brightness Adjustable: Yes
Wireless Remote: Yes
-
SHOWVEN® Maiman 15 full-colour RGB laser is a new product based on our Maiman platform. It is with double-layer structure design, IP65 rated enclosure. Equipped with safety switch key, remote E-stop function, scan-fail safety etc. safety related configurations ensure the safety and controllability of laser use to the greatest extent.
Specifications:
Power Supply: AC100-240V, 50/60Hz
Output: 15W
R module: 4W/LD Mitsubishi 638nm
G module: 5W/LD Nichia 520nm
B module: 6W/LD Nichia 450nm
Scanning System: AT50LB(+30°40K)
Beam Size: 5 ×6.5mm
Beam Divergence: <1.1mrad
Analogue modulation: 100K, Analog/TTL
IP level: IP65
Work Temp.: -20-40℃
Weight: 12kg
Dimension: 396×270×180mm
System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound
Compliant with: EN60825-1:2014+A11:2021
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety.
-
SHOWVEN® Maiman 20 full-colour RGB laser is a new product based on our Maiman platform. It is with double-layer structure design, IP65 rated enclosure. Equipped with safety switch key, remote E-stop function, scan-fail safety etc. safety related configurations ensure the safety and controllability of laser use to the greatest extent.
Specifications:
Power Supply: AC100-240V, 50/60Hz
Output: 20W
R module: 6W/LD Mitsubishi 638nm
G module: 6W/LD Nichia 520nm
B module: 8W/LD Nichia 450nm
Scanning System: AT50LB(+30°40K)
Beam Size: 6×6.5mm
Beam Divergence: <1.1mrad
Analogue modulation: 100K, Analog/TTL
IP level: IP65
Work Temp.: -20-40℃
Weight: 15kg
Dimension: 396×270×180mm
System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound
Compliant with: EN60825-1:2014+A11:2021
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety.
-
SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Specifications:
Power Supply: AC100-240V 50/60Hz
Output (max): 30W
R module: 8W/LD Mitsubishi 638nm
G module: 10W/LD Nichia 520nm
B module: 12W/LD Nichia 450nm
Scanning System: AT50iB(+30°35K)
Beam Size: 6×7mm
Beam Divergence: <1.2mrad(full angle)
Analogue modulation: 100K Analog/TTL
IP level: IP65
Cooling System: TEC cooling
Work Temp.: -20-40℃
Weight: 27kg
Dimension: 495×471×226mm
System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound
Compliant with: EN60825-1:2014+A11:2021
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
-
SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Specifications:
Power Supply: AC100-240V 50/60Hz
Output (max): 40W
R module: 10W/LD Mitsubishi 638nm
G module: 14W/LD Nichia 520nm
B module: 16W/LD Nichia 450nm
Scanning System:AT30H/840(±20°30K)
Beam Size: 6×8mm
Beam Divergence: <1.2mrad(full angle)
Analogue modulation: 100k Analog/TTL
IP level: IP65
Work Temp.: -20-40℃
Weight: 29kg
Dimension: 495×471×226mm
Dimension: EN60825-1:2014+A11:2021
System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
-
SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.
Specifications:
Power Supply: AC100-240V 50/60Hz
Output (max): 60W
R module: 15W/LD Mitsubishi 638nm
G module: 20W/LD Nichia 520nm
B module: 25W/LD Nichia 450nm
Scanning System: AT30H/1040 (20°25K)
Beam Size: 7×12mm
Beam Divergence: <1.5mrad(full angle)
Analogue modulation: 100K,Analog/TTL
IP level: IP65
Work Temp.: -20-40℃
Weight: 50kg
Dimension: 630×495×253mm
System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound
Compliant with: EN60825-1:2014+A11:2021
Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.
-
SONICBOOM ReCO2 is real CO2 JET simulator evolved from our SONICBOOM platform but with an additional high-speed turbofan, which makes it same blast speed as CO2 JET and even more powerful output upto 15m. With the 5L built-in tank, it can generate accumulatively 10min smoke columns, equals to 10 large size CO2 gas bottles. Just similar as our SONICBOOM JET, it also integrated with 30pcs of 9W LED, makes the smoke columns more colorful and impressive.
Specifications:
Dimension: 432x325x365mm
Weight: 30kg
Voltage and Fuse: AC220-240V, 50/60Hz, 15A/250V; AC100-120V, 50/60Hz, 18A/250V
Work Power: 3000W/1800W (220V version); 2400W/1800W (110V version)
Max Output Height: 15m
LED power: 9W*30PCS
Max Continuous Output Duration: 8s
Smoke Output: 120000cuft/min
Tank Capacity: 5L built-in tank
Fluid Consumption Rate: 500ml/min
DMX Channels: 1/11 channel switchable
Fuels: FX-S, FX-M
-
SPARKULAR® BLASTER is a brand new handheld SPARKULAR machine. We break through the traditional SPARKULAR design and creatively adopt a brand new structural concept makes SPARKULAR BLASTER a fantastic handhold spark effects device for DJs, singers etc. applications on stage.
Specifications:
Dimension: 585 x 270 x 95mm
Net weight: 3.8kg
Voltage: AC100-240V, 50/60Hz
Work Power: 180W
Housing Material: Reinforced nylon
Charging Time: Appr.40min
Standby Time: 90min
Firing Direction: Waving between 60° to 0°
Hopper Capacity: 200g
HC8200 Consumption Rate: 17g/min
Consumable: HC8200 MEDIUM
Effect Output: 2-4m adjustable (MEDIUM), 3-5m adjustable (LARGE)
-
SPARKULAR® Cyclone II is an upgrade based on SPARKULAR® Cylone. Thanks to the new design and technologies we introduced, it is with 35% smaller on the footprint, and 40% lighter on weight (only 16kg) comparing with the first generation. Besides, the noisy is also greatly decreased.
Specifications:
Dimension: 348×316×290mm
Weight: 16kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 1500W
Hopper Capacity: 450g
HC8200 consumption: 65g/min
Fountain Height: 5-10m adjustable
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT
Control: DMX
DMX channels: 2
-
SPARKULAR® II is a brand new upgrade based on patented SPARKULAR® platform combined with valuable feedbacks from our customers, latest technologies and our years of experiences,. Comparing with the SPARKULAR®, SPARKULAR® II with effect up to 6m, much lower noisy, more powerful feeding structure and real time motor status monitoring ensure less stuck and safer firing. 3.2” LCD color screen, touch keypad, flat structure design etc modern features makes it more user friendly when operating the system. It is an ideal choice for circumstance where low noisy output and higher spark effects are preferred.
Specifications:
MODEL: BT11/BT12
DIMENSION: 286×280×258mm
WEIGHT: 9kg
VOLTAGE: 220V(BT11)/110V(BT12), 50/60Hz
WORK POWER: 500W
EFFECT HEIGHT: HC8200 LARGE: 3-6m/MEDIUM: 2-4.5m/SMALL: 1.5-3m
HOPPER CAPACITY: Appr. 300g
CONTROL: DMX, Wireless
INTERFACE: Neutrik®powerCON TRUE1 IN/OUT 3 and 5 pin DMX IN/OUT
DMX channels:2
CASING MATERIAL: Anti-flaming ABS + PC, Aluminum
-
SPARKULAR® JET II is a brand new upgrade based on our first generation of SPARKULAR® JET combined with valuable feedbacks from our customers, latest technologies and our years of experiences. It is with much shorter firing delay and allows triple continuous shots with almost no turn around time. Besides, it update to our latest interface design with ARM indicator light; same as first generation, SPARKULAR® JET II also equipped with built-in automatic air compressor, no external pressure tank needed. Except 3 and 5-pin DMX control it also can be triggered by 9-60V pyro signal.
Specifications:
Dimension: 348×348×290mm
Weight: 25kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 800W
Hopper Capacity: 450g*2
HC8200 consumption rate: 20-25g/shot
Fountain Height: HC8200 LARGE: 9-10m; HC8200 MEDIUM: 6-8m
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT
Control: DMX, 9-60V pyro signal
DMX channels: 2
-
SPARKULAR® MOBILE is a battery powered truly wireless SPARKULAR developed by SHOWVEN. It is super compact and light weighted, only 6kg with built-in battery. Benefit from our intelligent battery management system and higher efficiency energy conversion, SPARKULAR MOBILE with extra long standby time, >3h when heating on and >144 when heating off. With our latest heating technology the new SPARKULAR MOBILE requires much lower (30% lower) temperature, thus ensure much safer for indoor use. It is an ideal choice for small gatherings, ceremonies or even stadium applications when power supply is complicated.
Specifications:
Dimension: 168 x 180 x 257mm
Net weight: 6kg
Voltage: AC100-240V, 50/60Hz
Housing Material: FR-ABS + Aluminium
Motor Status Monitoring: Yes
Heating up time: Appr. 2min
Charging time: Max. 5h
Charging power: 100W
Standby time: Standby with heating ON > 3h; Standby with heating OFF > 144h
Hopper Capacity: 100g
Interface: 3-pin XLR, POWER IN/OUT，DC 5V
Control: DMX; 2.4GHz and 433MHz wireless remote
Effect Height: HC8200 LARGE: 3-4m; HC8200 MEDIUM: 2-3m
-
SPARKULAR® WAVER is 180 degree waving spark effect originally developed by SHOWVEN. It can firing in any single direction between -90 to 90 degree or in waving sequences etc. With 72 preset firing sequences and various editable sparks effect brings infinite creativity to your stage.
Specifications:
Dimension: 300 x 290 x 273mm
Net weight: 15.5kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work power: 500W
Effect height: 2.5-4.5m adjustable
Hopper capacity: Appr. 400g
Housing Material: 304 stainless steel
Motor Status Monitoring: Yes
Color Screen: Yes, 3.2”
Firing Direction: Waving between -90° to 90° Fixed firing angle between -90° to 90°
Effect Angle Adjustable: Yes, -90° to 90°
Preset Firing Sequences: Yes, 72 preset firing sequences
Interface: 3-pin and 5-pin XLR
Control: DMX, 6 channels
-
SPARKULAR® waverFALL is 180°waving spark fall effect originally developed by SHOWVEN. It can firing in any single direction between -90° to 90° or in waving sequences. With 72 preset firing sequences and various editable sparks effect brings infinite creativity to your stage. It can also combined with SPARKULAR WAVER to generate a spark effect in any direction of 360 degrees.
Specifications:
Dimension: 300 x 305 x 285mm
Net weight: 17kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 500W
Housing Material: 304 stainless steel
Motor Status Monitoring: Yes
Color Screen: Yes, 3.2”
Firing Direction: Waving between -90° to 90°;Fixed firing angle between -90° to 90°
Effect Angle Adjustable: YES, -90° to 90°
Preset Firing Sequences: YES, 72 preset firing sequences
Hopper Capacity: 400g
HC8200 Consumption Rate: 25g/min
Interface: 3-pin and 5-pin XLR
Control: DMX, 6 channels
Effect Height: LARGE: 3-4m; LARGE I: 4-5m; LARGE II: 5-7m
-
SPARKULAR® WHEEL is another brand new sparks effects originally introduced by SHOWVEN. The output nozzles can rotate 360 degrees and can also firing in any fixed direction. It can simulate the molten iron flower effect, if combined several units together it can also generate fireworks wheel effects. It can be used on both big stages and small wedding gatherings.
Specifications:
Dimension: 310×307×285mm
Weight: 16kg
Voltage: AC200-240V / AC100-120V, 50/60Hz
Work Power: 500W
Hopper Capacity: 550g
HC8200 consumption: 50g/min
Fountain Height: Appr. 4m upward, 6-7m downward, 5-6m sparks diameter when rotating
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT
Control: DMX
DMX channels: 6
-
SPARKULAR® WP is a newly designed SPARKULAR for outdoor or high moisture environment applications, it is with 1200g extra large hopper and up to 6m adjustable fuller sparks effects. With the new concept design it is much easier for maintenance.
Specifications:
Dimension: 317x287x295mm
Weight: 14kg
Voltage: AC 200-240V/AC 100-120V,50/60Hz
Power: 700W
Hopper capacity:1200g
HC8200 consumption: 25g/min
Fountain Height: MEDIUM: 4-4.5m, LARGE/LARGE I(5.5-6m)
Control:DMX
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; IP65 rated 3-pin and 5-pin XLR IN/OUT
DMX channels:2
