Products Archive - Page 8 of 9

Specifications:

Dimension：435×380×405 mm

Weight：40 kg

Housing material：304 stainless steel

Input：AC100-240V, 50/60Hz

Work power：400W

Flame height：3-10m(no wind)

Usage in Rain: Yes

Ignition: Triple, high voltage electron ignition

Control: DMX, 9-60V pyro signal

Quick Couplers: ISO7241B G1/4 male

Work pressure range: 8-12Bar

Firing Angle: 5

Installation Direction: Any direction

Fuel: ISOPAR L

Pressure Gauge: Yes, mechanical

Category: FLAMER

Details

Specifications:

Dimension：76.5×82.5×230mm (clamps included)

Weight：1 kg

Input：110-120V / 220-240V,50/60Hz

Work power：30W

Load Capacity：20kg

Control：Direct on-off voltage control

Category: DROP

Details

Specifications:

Dimension：435 x 266 x 305mm

Weight：4.8kg

Voltage: AC100-240V, 50/60Hz

Work power：30W

Fluid Tray Capacity：2L

Bubble Fluid Consumption: 25ml/min

Battery：3pcs*18650, support 3h running time

Interface: 3-pin XLR

Control：DMX, manual, wireless remote

Output：Up to 8m

Category: BUBBLE

Details

SHOWVEN® Maiman 20 full-colour RGB laser is a new product based on our Maiman platform. It is with double-layer structure design, IP65 rated enclosure. Equipped with safety switch key, remote E-stop function, scan-fail safety etc. safety related configurations ensure the safety and controllability of laser use to the greatest extent.

Specifications:

Power Supply: AC100-240V, 50/60Hz

Output: 20W

R module: 6W/LD Mitsubishi 638nm

G module: 6W/LD Nichia 520nm

B module: 8W/LD Nichia 450nm

Scanning System: AT50LB(+30°40K)

Beam Size: 6×6.5mm

Beam Divergence: <1.1mrad

Analogue modulation: 100K, Analog/TTL

IP level: IP65

Work Temp.: -20-40℃

Weight: 15kg

Dimension: 396×270×180mm

System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound

Compliant with: EN60825-1:2014+A11:2021

Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety.

Details

SHOWVEN® LASER-Maiman15

SHOWVEN® Maiman 15 full-colour RGB laser is a new product based on our Maiman platform. It is with double-layer structure design, IP65 rated enclosure. Equipped with safety switch key, remote E-stop function, scan-fail safety etc. safety related configurations ensure the safety and controllability of laser use to the greatest extent.

Specifications:

Power Supply: AC100-240V, 50/60Hz

Output: 15W

R module: 4W/LD Mitsubishi 638nm

G module: 5W/LD Nichia 520nm

B module: 6W/LD Nichia 450nm

Scanning System: AT50LB(+30°40K)

Beam Size: 5 ×6.5mm

Beam Divergence: <1.1mrad

Analogue modulation: 100K, Analog/TTL

IP level: IP65

Work Temp.: -20-40℃

Weight: 12kg

Dimension: 396×270×180mm

System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound

Compliant with: EN60825-1:2014+A11:2021

Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety.

Details

uFlamer® Max Plus

uFlamer ^®Max Plus is a customized version of uFlamer® Max, with a firing duration up to 3 seconds, designed for professionals who require longer firing durations.

Specifications:

Dimension: 690 x 475 x 415 mm

Weight: 80kg

Input and Power: 200-240VAC, 50/60 Hz, 2.5KW

Housing Material: 304 Stainless steel

Effect Direction: Vertical

Max. Flame Height (No Wind): Nozzle XXH: 20m

Fuels: ISOPAR G, H, L, M; ISOPROPANOL

Fuel Tank Capacity: 30L

Fuel Consumption Rate: Appr. 1L/s

Interface: NEUTRIK POWERCON TRUE1 IN/OUT;Waterproof 3-pin and 5-pin XLR IN/OUT

Control: DMX, 9-60V Pyro Signal

E-stop: Yes

ARM Indicator Light: Yes

Liquid Level Sensor: Yes

Ignition: High Voltage Electron Ignition * 3

Max.Firing Duration: 3s

Use in Rain: Yes

Details

uFetti Blower CB21

uFetti Blower CB21 is a more compact yet still powerful DMX controllable automatic confetti blower, equipped with customized low noisy high speed blower and a 45L extra large automatic confetti dosing hopper. What’s more we adopt durable patented brush feeding structure instead of foam feeding structure ensure longer service life. Operator can adjust the confetti output density by DMX. It can be widely used in indoor, outdoor and various special applications.

Specifications:

Dimension: 926 x 540 x 990mm

Net Weight: 106kg

Voltage: AC200-240V / AC100-120V, 50/60Hz

Work Power: 2400W

Hopper Capacity: 45L (max.10kg paper confetti, 20kg metallic)

Interface: 3-pin and 5-pin XLR

Control: DMX, Manual

Output : Up to 15m

Output Angle Adjustable: Yes

Output Density Adjustable: Yes

LED Warning Light: Yes

Details

SPARKULAR® WHEEL

SPARKULAR^® WHEEL is another brand new sparks effects originally introduced by SHOWVEN. The output nozzles can rotate 360 degrees and can also firing in any fixed direction. It can simulate the molten iron flower effect, if combined several units together it can also generate fireworks wheel effects. It can be used on both big stages and small wedding gatherings.

Specifications:

Dimension: 310×307×285mm

Weight: 16kg

Voltage: AC200-240V / AC100-120V, 50/60Hz

Work Power: 500W

Hopper Capacity: 550g

HC8200 consumption: 50g/min

Fountain Height: Appr. 4m upward, 6-7m downward, 5-6m sparks diameter when rotating

Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT

Control: DMX

DMX channels: 6

Details

SPARKULAR® JET II

SPARKULAR^® JET II is a brand new upgrade based on our first generation of SPARKULAR^® JET combined with valuable feedbacks from our customers, latest technologies and our years of experiences. It is with much shorter firing delay and allows triple continuous shots with almost no turn around time. Besides, it update to our latest interface design with ARM indicator light; same as first generation, SPARKULAR^® JET II also equipped with built-in automatic air compressor, no external pressure tank needed. Except 3 and 5-pin DMX control it also can be triggered by 9-60V pyro signal.

Specifications:

Dimension: 348×348×290mm

Weight: 25kg

Voltage: AC200-240V / AC100-120V, 50/60Hz

Work Power: 800W

Hopper Capacity: 450g*2

HC8200 consumption rate: 20-25g/shot

Fountain Height: HC8200 LARGE: 9-10m; HC8200 MEDIUM: 6-8m

Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT

Control: DMX, 9-60V pyro signal

DMX channels: 2

Details

SPARKULAR® Cyclone II

SPARKULAR^® Cyclone II is an upgrade based on SPARKULAR^® Cylone. Thanks to the new design and technologies we introduced, it is with 35% smaller on the footprint, and 40% lighter on weight (only 16kg) comparing with the first generation. Besides, the noisy is also greatly decreased.

Specifications:

Dimension: 348×316×290mm

Weight: 16kg

Voltage: AC200-240V / AC100-120V, 50/60Hz

Work Power: 1500W

Hopper Capacity: 450g

HC8200 consumption: 65g/min

Fountain Height: 5-10m adjustable

Interface: NEUTRIK POWERCON TRUE1 IN/OUT; 3 and 5 pin DMX IN/OUT

Control: DMX

DMX channels: 2

Details

cFlamer

cFlamer is a color flamer with a single vertical output nozzle. It integrated with a water and corrosion-resistant pump and pipe systems inside machine, along with SHOWVEN original color additives, it can generate 5 different color flames red, green, blue, yellow and purple. Besides, it is also compatible with regular flame fluid such as ISOPAR, ISOPROPANOL. The maximum flame height is about 10m.

Specifications:

Dimension: 370x330x305mm

Weight: 20kg

Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 400W

Housing Material: Aluminum + 304 stainless steel

Effect Direction: Vertical

Max. Flame Height (No Wind): 10m

Fuels: Color fluid, ISOPAR L, ISOPROPANOL

Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE

Fuel Tank Capacity: 5.3L

Nozzle Type: Nozzle cH

Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT

Control: DMX, 9-60V Pyro Signal

E-stop: Yes

ARM Indicator Light: Yes

Fuel Filtration: Yes

Ignition: High Voltage Electron Ignition*2

Valve: Dual

Use in Rain:Yes

Details

cFlamer mVolcano

cFlamer mVolcano is a highly compact mini 5 heads color flamer, it can fire in five different directions while it can only fire in one direction each time. Same as cFlamer it integrated with a water and corrosion-resistant pump and pipe systems inside machine, along with SHOWVEN original color additives, it can generate 5 different color flames red, green, blue, yellow and purple.

Specifications:

Dimension: 460x330x305mm

Weight: 26kg

Input and Power: AC 100-120V/ AC 200-240V, 50/60 Hz, 400W

Housing Material: Aluminum + 304 stainless steel

Effect Direction: 5 angles

Max. Flame Height (No Wind): 10m

Fuels: Color fluid, ISOPAR L, ISOPROPANOL

Color Additives Optional: FX-RED/GREEN/BLUE/YELLOW/PURPLE

Fuel Tank Capacity: 7.5L

Nozzle Type: Nozzle cH

Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT

Control: DMX, 9-60V Pyro Signal

E-stop: Yes

ARM Indicator Light: Yes

Fuel Filtration: Yes

Ignition: High Voltage Electron Ignition*2

Valve: Dual

Use in Rain:Yes

Details

Flame Head – uFlamer® x5

Specifications:

KABUKI DROP

SHOWVEN® KABUKI DROP is a compact and exquisite designed reliable device for drops of curtains, open up balloons, unroll of banners or any other objects on stages. It is a direct on-off system with 20kg loading capacity.

Specifications:

BUBBLE MACHINE

SHOWVEN® Bubble Machine is a compact and battery powered bubble generator. Comparing with existing models on market, our bubble machine with more and higher bubble output by optimizing the machine's air duct. It can be controlled manually, by wireless remote or via DMX console.

Specifications:

SHOWVEN® LASER-Maiman20

Specifications:

SHOWVEN® LASER-Maiman15

Specifications:

uFlamer® Max Plus

Specifications:

uFetti Blower CB21

Specifications:

SPARKULAR® WHEEL

Specifications:

SPARKULAR® JET II

Specifications:

SPARKULAR® Cyclone II

Specifications:

cFlamer

Specifications:

cFlamer mVolcano

Specifications:

Specifications:

SHOWVEN® KABUKI DROP is a compact and exquisite designed reliable device for drops of curtains, open up balloons, unroll of banners or any other objects on stages. It is a direct on-off system with 20kg loading capacity.

Specifications:

SHOWVEN® Bubble Machine is a compact and battery powered bubble generator. Comparing with existing models on market, our bubble machine with more and higher bubble output by optimizing the machine's air duct. It can be controlled manually, by wireless remote or via DMX console.

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Contact Us