Home/Products
  •

    Creeper AQ PLUS Low Fog Generator

    Creeper AQ PLUS Low Fog Generator is a professional fog machine designed by SHOWVEN, that uses the principle of ultrasonic water mist mixing to diffuse and diffuse smoke on the ground. Long working hours, no need to use dry ice, the main consumable is pure water, low cost, and no harm to the environment or human body.
     

    Specifications:

    MODEL: Creeper AQ PLUS
    DIMENSION: 950×500×540mm
    WEIGHT: 48kg
    VOLTAGE: 220V/110V, 50/60Hz
    POWER: 2500W
    HEAT UP TIME: 1-2min
    MAX FOG OUTPUT: 20000cuft/min
    FOG FLUID TANK CAPACITY: 3.3L
    MAX. FLUID CONSUMPTION: Appr.32ml/min
    WATER TANK CAPACITY: 35L
    MAX. WATER CONSUMPTION: Appr.500ml/min
    FULLY LOADED OUTPUT TIME: 100+min
    INTERFACE: 3-PIN & 5-PIN XLR
    CONTROL: DMX 2/3 channel; Remote control
    CONSUMABLES: FX-M fog fluid, Water
    Category: PRO FOG MACHINE
    Details

  • CREEPER ICE dry ice machine

    CREEPER ICE series dry ice machine is a kind of low fog machine based on dry ice, different from other dry ice machine available on market, CREEPER ICE with DMX control, separated water and dry ice reservoir (patents CN201921921757.9), operators can not only control the on/off easily at control desk, but also can adjust the output volume according to requirement. CREEPER ICE can generate dense, billowy clouds of low lying fog with good ground adherence in any venue. Excellent choice for circumstance which need strong ground adhesion fog. Two types of dry ice machine with different output are available from SHOWVEN: CREEPER ICE and CREEPER ICE PLUS.

     

    Specifications:

    Model: CREEPER ICE
    Dimension: 492x584x760mm
    Weight: 35kg
    Voltage: 220V/110V, 50/60Hz
    Fuse: Breaker 20A
    Work power: 3000W/6000W (230V) 1600W/3200W (120V)
    Heating Up Time: Appr. 30min @6000W Appr. 50min @3200W
    Dry Ice Capacity: 15kg
    Water Tank Capacity: 55L
    DMX-512: yes
    Wireless Control: yes
    Output Volume Adjustment: 50%-100%
    Max. Coverage Area: Appr. 500㎡
    Cumulative Output Time: 5-10min
    Consumable: Dry ice, Water
    Category: LOW FOG MACHINE
    Details

  • CREEPER ICE PLUS dry ice machine

    CREEPER ICE series dry ice machine is a kind of low fog machine based on dry ice, different from other dry ice machine available on market, CREEPER ICE with DMX control, separated water and dry ice reservoir (patents CN201921921757.9), operators can not only control the on/off easily at control desk, but also can adjust the output volume according to requirement. CREEPER ICE can generate dense, billowy clouds of low lying fog with good ground adherence in any venue. Excellent choice for circumstance which need strong ground adhesion fog. Two types of dry ice machine with different output are available from SHOWVEN: CREEPER ICE and CREEPER ICE PLUS.

     

    Specifications:

    Model: CREEPER ICE PLUS
    Dimension: 642×584×887mm
    Weight: 45kg
    Voltage: 220V/110V, 50/60Hz
    Fuse: Breaker 3P 20A
    Work power: 3000W/9000W (230V) 1600W/4800W (120V)
    Heating Up Time: Appr. 40min @9000W Appr. 70min @4800W
    Dry Ice Capacity: 30kg
    Water Tank Capacity: 75L
    DMX-512: yes
    Wireless Control: yes
    Output Volume Adjustment: 50%-100%
    Max. Coverage Area: Appr. 800㎡
    Cumulative Output Time: 5-10min
    Consumable: Dry ice, Water
    Category: LOW FOG MACHINE
    Details

  • DMX Relay R12

    £900.00

    The DMX Relay R12 allows sfx technicians to add DMX control to any switchable device which not include onboard DMX such as CO2 jet, confetti blasters etc. It can convert the DMX signal from the master console into a voltage signal for output. DMX Relay R12 maximum support 12units of switchable devices.

     

    Specifications:

    Dimension: 485 x 180 x 120 mm
    Weight: 5kg
    Input: 200-240V/100-120V, 50/60Hz
    Control Voltage Output: 110V / 220V
    Voltage Output Interface: 12
    Maximum Output Current: 10A
    Power Input Connector: Neutrik NAC3PX-TOP
    Voltage Output Connector: Neutrik NAC3FPX-TOP
     
    Add to cart Details

  • DMX SPLITTER 8

    £450.00
    DMX SPLITTER 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals into 8 separate outputs. When it use together with SHOWVEN devices (FXcommander and SHOWVEN special effects device) it with bi-directional data transfer function. Each input and output interface adopts electrical isolation technology. DMX SPLITTER 8 can effectively buffer, amplify and split standard DMX signal received, input to output, output to output electrical isolation withstand voltage greater than 1000V.

    Specifications:

    Dimension: 530×153×49mm
    Weight: 2.8kg
    Input: AC 220V/110V, 50/60 Hz
    Work power: 5W
    Housing material: 304 Stainless steel
    Interface: Neutrik PowerCON TRUE1; Neutrik DMX IN×1; Neutrik DMX THRU×1; Neutrik DMX OUT×8

    Category: CONSOLE&PYRO
    Add to cart Details

  • FAKE FLAME

    SHOWVEN® Fake Flame simulate the gas flames, but uses no flammable materials. It create a very realistic artificial flame by projecting colored light to water mist. It is designed for theme park, theater etc occasions where a flame effect is desired while real flame is not allowed.

    Specifications:

    Dimension: 760 x 460 x 660mm
    Weight: 35kg
    Voltage: AC200-240V / AC100-120V, 50/60Hz
    Work Power: 800W
    LED: 3W, 68pcs
    Tank Capacity: 12L
    Consumable: Water (purified water is preferred)
    Interface: 3-pin and 5-pin XLR
    Control: DMX, 4 Channels
    Fake Flame Height: 1-2m
    Fake Flame Height Adjustable: Yes
    Fake Flame Brightness Adjustable: Yes
    Wireless Remote: Yes

     
    Details

  • Flame Head – uFlamer® PF10

    SHOWVEN FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head, pump station, control box and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed. Any installation direction of flame heads brings endless design inspiration to event planners.
     

    Specifications:

    Dimension：250 x 200 x 410 mm
    Net Weight：15 kg
    Housing material：Aluminum
    Input：220V, 110V, 24V customizable
    Work power：120W
    Flame height：Up to 10m
    Fuel: ISOPAR
    Fuel consumption: 60ml/s (Nozzle M), 30ml/s (Nozzle L)
    Ignition: Dual, high voltage electron ignition
    Control: DMX, Direct ON-OFF customizable
    Quick Couplers: ISO7241B G1/4 male
    Work pressure range: 8-12bar
    Installation angles: Any direction even upside down
    Category: FLAMER
    Details

  • Flame Head – uFlamer® X1800

    SHOWVEN® FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head, pump station, control box and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed. Any installation direction of flame heads brings endless design inspiration to event planners.
     

    Specifications:

    Dimension：370 x 380 x 380 mm
    Net Weight：19 kg
    Housing material：304 Stainless steel
    Input：220V, 110V
    Work power：260W
    Flame height：Up to 10m
    USAGE IN RAIN: yes
    Quick Couplers: ISO7241B G1/4 male
    Min. firing duration: 0.1s
    Firing Angle: 210° (±105°)
    Fuel: ISOPAR
    Fuel consumption: 60ml/s (Nozzle M), 30ml/s (Nozzle L)
    Ignition: Dual, high voltage electron ignition
    Control: DMX, 9-60V Pyro signal
    USAGE IN RAIN: yes
    WORK PRESSURE RANGE: 8-12bar
    INSTALLATION ANGLES: Any direction,
    bottom plate need protective cover (optional) to achieve waterproof function
    Category: FLAMER
    Details

  • Flame Head – uFlamer® x20

    SHOWVEN 18m FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head X20, pump station P20H, accumulator model and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed.
     

    Specifications:

    Dimension：330 x 330 x 320 mm
    Weight：18 kg
    Housing material：304 stainless steel
    Input：AC100-240V, 50/60Hz
    Work power：100W
    Flame height：16-18m(no wind)
    Usage in Rain: Yes
    Fuel consumption:1000ml/s
    Ignition: Triple, high voltage electron ignition
    Control: DMX, 9-60V pyro signal
    Quick Couplers: ISO7241B G1/4 male
    Work pressure range: 40-60Bar
    Firing Angle: Vertical Up
    Installation Direction: Vertical Up
    Fuel: ISOPAR L (if use with uPumper P20H)
    Pressure Gauge: Yes, mechanical
    Min.Firing Duration: 0.2s
    Max.Firing Duration: 1s
     
    Category: FLAMER
    Details

  • Flame Head – uFlamer® x5

    £10,000.00
    SHOWVEN® FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head, pump station, control box and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed. uFlamer X5 is a flame head with 5 output,each nozzle can be controlled independently.
     

    Specifications:

    Dimension：435×380×405 mm
    Weight：40 kg
    Housing material：304 stainless steel
    Input：AC100-240V, 50/60Hz
    Work power：400W
    Flame height：3-10m(no wind)
    Usage in Rain: Yes
    Ignition: Triple, high voltage electron ignition
    Control: DMX, 9-60V pyro signal
    Quick Couplers: ISO7241B G1/4 male
    Work pressure range: 8-12Bar
    Firing Angle: 5
    Installation Direction: Any direction
    Fuel: ISOPAR L
    Pressure Gauge: Yes, mechanical
     
    Category: FLAMER
    Add to cart Details

  • FLAME SYSTEM – Accessories

    SHOWVEN FLAME SYSTEM is a hydraulic based flame effect solution for project or truss mounted installations. It is consist of flame head, pump station, control box and accessories such as hoses, cables etc. It can easily achieve remote fuel supply with the pump station and no nitrogen tank needed. Any installation direction of flame heads brings endless design inspiration to event planners. In order to meet the requirements of different application scenarios we designed two pump station (uPumper® P20 and uPumper® P4) and two flame heads (uFlamer® PF10 and uFlamer® X1800).

    Hose:

    High pressure steel wire braided rubber hose. Main hose is used to connect between uPumper® P20 to fuel dispenser. Branch Hose is used to connect between fuel dispenser to flame head, uPumper® P4 to flame head.
       Main Hose 1¼ DN32                                 Branch Hose 3/8 DN10

    Fuel Dispenser:

    Fuel distribution between pump station and flame heads.
    T-shape dispenser T 1¼-1¼-1¼            T-shape dispenser T 1¼-3/8-1¼
        Fuel dispenser 1 TO 6                            Fuel dispenser 1 TO 12
    Category: FLAMER
    Details

  • FX-M PRO MEDIUM FOG FLUID

    —— FOG FLUID

     Ready to use;
     Environmental friendly;
     In compliance with RoHS;
     High quality, compatible with SHOWVEN® series machines.

    FX-M PRO medium fog fluid is medium concentration fog fluid for foggers, low lying fog machines etc. it is suitable for our PRO FOG MACHINE X-S3000, CREEPER AQ series low fog generator etc machine. It is with long lasting fog effects. Combining with the CREEPER AQ low fog generator it can generate very good ground smoke effect.

    Details

Select your country

Asia Africa Oceania Europe North America South America

    Contact Us