Products Archive - Page 7 of 9

CIRCLE FLAMER II

CIRCLE FLAMER II is developed with the integration of our second generation liquid flamer plateform and CIRCLE FLAMER platform, to generate bigger and higher flame throw upto 12m with 210° waving angles, With dual built-in high pressure pump, it ensures better combustion rate than existing liquid flamers on market. The waving motor of CIRCLE FLAMER II with angle block detection and memory function thus it is more easier for operator to set angle limit. It can also be powered with 18650 batteries.

Specifications:
Dimension: 610 x 330 x 330 mm Weight: 32kg Input and Power: 100-240VAC, 50/60 Hz, 550W Housing Material: Aluminum Effect Direction: 210° (±105°) Max. Flame Height (No Wind): Nozzle H: 10-12m Fuels: ISOPAR G, H, L, M; ISOPROPANOL Fuel Tank Capacity: 9L Fuel Consumption Rate:Nozzle M: 60ml/s Interface: NEUTRIK POWERCON TRUE1 IN/OUT;Waterproof 3-pin and 5-pin XLR IN/OUT Control: DMX, 9-60V Pyro Signal E-stop: Yes ARM Indicator Light: Yes Liquid Level Sensor: Yes Ignition: High Voltage Electron Ignition * 2 Valve: Dual Pump: Dual Built-in Battery Design: Yes, 18650 battery Use in Rain: Yes

Details
uFlamer® X-Gasboom

uFlamer® X-Gasboom is the first gas flamer with 180° waving angles, it inheriting all the safety designs of uFlamer Gasboom including 0.1s super sensitive flame monitoring, cascadable power cut-off E-stop connector, dual high voltage electron igniter, safety lock, dual magnetic valves, shut-off valve, ARM warning light etc. With 5 types of nozzles optional, 2/4 built-in gas cartridges positions, flame effect height from 2 to 8m ensure versatile applications for both indoor and outdoor events.

Specifications:
Dimension: 400 x 360 x 350mm Weight: 20kg Input and Power: 100-240VAC, 50/60 Hz 200W Housing Material: 304 stainless steel Effect Direction: 180° (±90°) Flame Height: 2-8m (nozzle size, firing time, temp. etc) E-Stop Interface: Yes, can be connected in series Dual Magnetic Valves: Yes, connect in series High Sensitive Flame Monitoring: Yes, sensitivity up to 0.1s Interface: NEUTRIK POWERCON TRUE1 IN/OUT;Waterproof 3-pin and 5-pin XLR IN/OUT Control: DMX 512, 9-60V voltage input Wireless, with Wirelss DMX Receiver (5-PIN DMX IN with DC5V power supply) Ignition: High Voltage Electron Ignition * 2 Built-in Battery Design: Yes, 8*18650 Lithium cells Waterproof Level: Can be used in heavy rain Firing Duration: 0.1-30s Fuel: LPG propane or butane gas, gas cartridges bottle, aerosol cartridges Cartridge Holder: Twin cartridge holder with 2 shut-off valves and 2 non-return valves;Quadruple cartridge holder with 4 shut-off valves and 4 non-return valves (optional) Micro Filter: Yes, installed between shut-off and non-return valves

Details
uFetti Blower CB16

uFetti Blower CB16 is DMX controllable acompact confetti launcher, equipped with high speed blower and a 9L automatic confetti dosing hopper. Operator can adjust the confetti output density by DMX even under running status. It can be widely used in indoor, outdoor and various special applications.

Specifications:
Dimension: 573x324x384mm Net weight: 19kg Voltage: AC200-240V / AC100-120V, 50/60Hz Work Power: 1600W Hopper Capacity: 9L (tissue paper 2kg, metallic 3kg) Continuous Output Durations with Full Load: 2-15min Interface: 3-pin and 5-pin XLR Control: DMX, Wireless DMX (via 5-PIN DMX IN) Output: Up to 10m Blower Speed Adjustable: Yes Output Density Adjustable: Yes LED Warning Light: Yes

Details
uFetti Shooter

uFetti Shooter is a type of new confetti/streamer shooter working with compressed air, equipped with built-in air compressor and battery (CA12) makes it super easier for stadium applications, together with SHOWVEN PyroSlave series firing system to achieve non interference wireless control, no DMX or power cable are needed. For faster pressurize of the tank, we reserve the external air coupling connector so that operator can use their own air compressor to fill the tank. To meet different output volume request, we developed two models uFetti Shooter CA12 and CA36 with different output capacity.

Specifications:
Dimension: 600 x 560 x 880mm (CA12 with casters);730 x 645 x 880mm (CA36 with casters) Net Weight: 75kg (CA12) / 90kg (CA36) Voltage: AC100-240V, 50/60Hz Work Power: 180W (CA12) / 220W (CA36) Confetti Pipe Capacity: 5L (CA12) / 10L (CA36) Interface: 3-pin and 5-pin XLR, PowerCON TRUE 1 E-stop Connector: YES, can be connected in series Output : CA12: Up to 43m (20m*5cm streamer), up to 22m (confetti);CA36: Up to 45m (20m*5cm streamer), up to 22m (metallic confetti) Output Angels: -27°-41° (12 adjustable angles) 18650 Battery Powered Design: Yes (CA12), NO (CA36) Pressure Tank Volume: 12L (CA12) / 36L (CA36) External Air Compressor Connetor: Yes Caster: 4 casters with brake Valve Size: 2.5 inch (CA12), 3 inch (CA36)

Details
SHOWVEN® LASER-Maiman30

SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.

Specifications:
Power Supply: AC100-240V 50/60Hz Output (max): 30W R module: 8W/LD Mitsubishi 638nm G module: 10W/LD Nichia 520nm B module: 12W/LD Nichia 450nm Scanning System: AT50iB(+30°35K) Beam Size: 6×7mm Beam Divergence: <1.2mrad(full angle) Analogue modulation: 100K Analog/TTL IP level: IP65 Cooling System: TEC cooling Work Temp.: -20-40℃ Weight: 27kg Dimension: 495×471×226mm System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound Compliant with: EN60825-1:2014+A11:2021 Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.

Details
SHOWVEN® LASER-Maiman40

SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.

Specifications:
Power Supply: AC100-240V 50/60Hz Output (max): 40W R module: 10W/LD Mitsubishi 638nm G module: 14W/LD Nichia 520nm B module: 16W/LD Nichia 450nm Scanning System:AT30H/840(±20°30K) Beam Size: 6×8mm Beam Divergence: <1.2mrad(full angle) Analogue modulation: 100k Analog/TTL IP level: IP65 Work Temp.: -20-40℃ Weight: 29kg Dimension: 495×471×226mm Dimension: EN60825-1:2014+A11:2021 System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.

Details
SHOWVEN® LASER-Maiman60

SHOWVEN® series full-colour RGB lasers are launched based on our more than 4 years in-depth laser market research. We aimed to bring quality, premium design and cost-effective laser system to the global market. Our Maiman series full-colour RGB lasers with double-layer structure design, IP65 rated enclosure. Pure diode light source guarantee higher reliability and smaller beam divergence angle. Equipped with safety switch key, remote E-stop function etc. safety configurations ensure the safety and controllability of laser use to the greatest extent. To extend the service life of our laser we equipped with PWM fan control, noise reduction design, realtime temperature monitoring and over-temperature protection function.

Specifications:
Power Supply: AC100-240V 50/60Hz Output (max): 60W R module: 15W/LD Mitsubishi 638nm G module: 20W/LD Nichia 520nm B module: 25W/LD Nichia 450nm Scanning System: AT30H/1040 (20°25K) Beam Size: 7×12mm Beam Divergence: <1.5mrad(full angle) Analogue modulation: 100K,Analog/TTL IP level: IP65 Work Temp.: -20-40℃ Weight: 50kg Dimension: 630×495×253mm System Control: FB4, Ethernet, DMX, ILDA, Auto, SD card, Sound Compliant with: EN60825-1:2014+A11:2021 Safety Features: Safety Switch Key, Remote Emergency Stop System (can be connected in daisy chain), scan-fail safety etc.

Details
PyroMote

PyroMote is a handheld intelligent system dedicated to controlling PyroSlave for fireworks displays. It uses a touch screen to complete the setting operation and a physical keyboard to realize the ignition operation. It can not only realize manual firing with buttons, but also running auto ignition files. Besides, it supports TLC time code function. It is a handy and powerful tool for small to medium-sized fireworks displays.

Specifications:
Dimension: 218 x 107 x 40mm Net Weight: 0.5kg Input: 5V 2A Work Power: 10W Casing material: Aluminium Battery Powered: 2pcs 18650 battery Charging Time: 3h Standby Time: 6h Wireless Function: Dual band wireless PYRO Interface: USB, 3.5mm Audio Output, LTC IN, DMX OUT Work Temp.: -20℃-50℃

Category: CONSOLE&PYRO

Details
FXmote

FXmote is a simple wireless remote specially designed to update for the low quality remote controller we order from market for our series of machine. It is with OLED screen to show the device, effects and battery volume etc, compatible with our YK02 and PROGO remote controller.

Specifications:
Dimension: 117 x 65 x 28mm Net Weight: 0.15kg Battery: 3pcs 23A 12V battery Work Power: 0.2W Work Temp.: -20℃-50℃ Simulated Remote Control Type: YK02 and PROGO

Category: CONSOLE&PYRO

Details
PyroSlave C16

PyroSlave C16 is light weighted, suitcase style module derived from our PyroSlave series fireworks igniter, it is an affordable 16 cue firing module for small fireworks displays or hobbyist. PyroSlave C16 offers both quickplug and clamp connectors. Each output cue with indicator light to show the status. Can be communicate with Fxcommander or PyroMote in a dual-band wireless or wired way.

Specifications:
Dimension: 295 x 205 x 91 mm Net Weight: 1.7 kg Output: 16 Trigger Indicate: RED means firing, GREEN means connected Address: 256 Control: Dual-band wireless, 2-wire PBUS (communication + charging) Wireless Range: 600m Wired Range: 2000m Firing Voltage: 12V Firing Current: 5A Firing Duration: 500ms Resistance Test: Yes Battery: 4 * 18650 cell (4.2V, 2500mAh), battery not included Operation Time: 60h, sleep mode 2 weeks; Wired mode: non-stop Charging Control: Max. 25 units PyroSlave per PyroAdaptor Wired Communication: Max. 64 units PyroSlave per PyroAdaptor Charging Time: Appr. 6h Minimum Firing Interval: 10ms

Category: CONSOLE&PYRO

Details
PyroSlave X4

PyroSlave X4 is a fireworks igniter specially designed for stage special effects professionals to wireless control of Flamer, confetti shooter etc via Pyro signal. To adapt to extreme outdoor applications, PyroSlave X4 equipped with robust aluminum housing, touch keys, and metal connection terminals. PyroSlave X4 with 433M and 868M dual-band antennas communicate simultaneously, preventing signal interference on a single frequency band. Compared with wireless DMX, PyroSlave X4 wireless signals have perfect anti-interference performance in large-scale events.

Specifications:
Dimension: 150 x 165 x 85 mm Net Weight: 1.3 kg Output: 4 Trigger Indicate: LCD display and record Address: 256 (00 to FF) Control: Dual-band wireless Wireless Range: 600m Firing Voltage: 24V Firing Current: 5A Firing Duration: 500ms Resistance Test: Yes Battery: 2 * 18650 cell (4.2V, 2500mAh), battery not included Operation Time: 60h, sleep mode 2 weeks Charging Port: Type C Charging Time: Appr. 6h Waterproof Level: IP65 Minimum Firing Interval: 10ms

Category: CONSOLE&PYRO

Details
CO2 JET X-C1

CO₂ JET is a compact CO₂ effect machine blows clouds of CO₂ up to 8m. It is with multi angles adjustable and unlimited installations even upside down. Built in DMX and direct on-off control makes it versatile for different application situations.

Specifications:
Dimension: 285 x 192 x 192 mm Weight: 5kg Input: AC110V / AC220V Work Power: 24W Max Output Height: 10m Control: DMX, Direct on-off voltage control DMX Channels: 1 channel Quick Coupler: DNP G3/8” quick coupler Pressure: 60bar / 870.22Psi

Details